• Show Sidebar

There are 554 products.

Active filters

  • Color: Black
Pegatinas Para Casco De Bicicleta Met Troquelado - Star Sam

Met bike helmet compatible stickers

€9.00
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Bontrager Aeolus Pro5 50mm Bike Sticker Choose Colour - Star Sam

Bontrager Aeolus Pro5 50mm road wheel rim bike compatible stickers

€26.00
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Mavic Cosmic SLR 40mm Rims Bike Sticker Choose Colour - Star Sam

Mavic Cosmic SLR 40mm wheel rim road bike compatible stickers mod-2

€31.00
Available colours:  22

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Orbea Occam 2021 Frame Bike Sticker Choose Your Colour - Star Sam

Orbea Occam 2021 frame bike compatible stickers

€30.50
Available colours:  21

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Boxxer Select Die-Cutting Fork Bike Sticker - Star Sam

Rock Shox Boxxer Select 2020 die cut fork bike compatible stickers

€18.00
Available colours:  18

How to use                 

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Trek Factory Racing RSL Degraded Frame Bike Sticker - Star Sam

Trek Factory Racing RSL Sram frame bike compatible stickers

€21.50
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Yari Ultimate Die-Cut Fork Bike Sticker  - Star Sam

Rock Shox Yari Ultimate 2020 die cut fork bike compatible stickers

€17.00
Available colours:  18

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Para Buje De Bicicleta Fulcrum Fondo Color - Star Sam

Stickers compatible with Fulcrum bike hubs

€9.00
Available colours:  18

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera

Pegatinas Para Cuadro De Bicicleta Santa Cruz Modelo 1 - Star Sam

Stickers compatible with Santa Cruz bike frame mod-1

€20.00
Available colours:  14

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Cuadro Bicicleta Specialized Kenevo Modelo 1 - Star Sam

Stickers compatible with Specialized Kenevo bike frame mod-1

€22.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera.

Pegatinas Cuadro Bicicleta Specialized S-works Modelo 4 - Star Sam

Stickers compatible with Specialized S-works bike frame mod-4

€18.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Cuadro Bicicleta Specialized Modelo 4 - Star Sam

Stickers compatible with Specialized bike frame mod-4

€18.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Cuadro Bicicleta Specialized Modelo 12 - Star Sam

Stickers compatible with Specialized bike frame mod-12

€9.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Cuadro Bicicleta Specialized Xc Fsr - Star Sam

Specialized Xc Fsr bike frame compatible stickers

€18.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Buje De Bicicleta Zipp Fondo a Color - Star Sam

Stickers compatible with Zipp bike hubs

€9.00
Available colours:  10

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Cuadro De Bicicleta BH Modelo 7 - Star Sam

Bike frame compatible stickers Kit BH mod-2

€15.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 36 Rhythm troquelado - Star Sam

Stickers compatible with Fox 36 Rhythm die-cut 2019 bike fork.

€15.00
Available colours:  14

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Para Bicicleta Amortiguador Fox Float - Star Sam

Stickers compatible with Fox Float Performance Elite bike shock absorber

€10.00
Available colours:  19

Instructions for use

Previously clean the surface where the adhesive is to be applied. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive on the desired place and apply water. Once in place, apply firm and even pressure on the sticker from the centre outwards. 

Pegatinas Amortiguador Rock Shox Monarch Plus RC3 - Star Sam

Stickers compatible with Rock Shox Monarch Plus RC3 bike shock absorber

€10.00
Available colours:  16

Instructions for use

Previously clean the surface where the adhesive is to be applied. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive on the desired place and apply water. Once in place, apply firm and even pressure on the sticker from the centre outwards. 

Roval Road 40mm Rims Bike Sticker Choose Your Colour - Star Sam

Roval 40mm wheel rim road bike compatible stickers

€26.00
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Fox Evolution Series 29 Bike Sticker Choose Colour - Star Sam

Fox Evolution Series fork bike compatible stickers 29''

€14.00
Available colours:  16

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Para Cuadro De Bicicleta Cube 4 Logos - Star Sam

Stickers compatible with Cube 4 bike frame logos

€13.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Rock Shox 35 Bike Sticker Choose Colour Year 2021 - Star Sam

Rock Shox 35 2021 fork bike compatible stickers

Brands: Rock Shox
€21.50
Available colours:  21

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Reba Bike Die-Cut Sticker Choose Colour 2020 - Star Sam

Rock Shox Reba die cut 2020 fork bike compatible stickers

€17.00
Available colours:  19

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Rock Shox Sid Vynils 29 Model 2 Fork Bike Sticker - Star Sam

Rock Shox Sid Vinyl fork bike compatible stickers 29'' mod-2

€14.00
Available colours:  9

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test