• Show Sidebar

There are 1221 products.

Active filters

  • Color: Green
Fox Float X2 Shock Absorber Bike Sticker Year 2021 - Star Sam

Fox Float X2 2021 shock absorber bike compatible stickers

Brands: Fox
€11.50
Available colours:  19

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatina Fox 36 Heritage Collection 2021 para horquilla

Stickers compatible with fork bike Fox 36 Heritage Collection 2021

Brands: Fox
€18.00
Available colours:  18

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Fox 36 Factory Step Cast - Star Sam

Stickers compatible with fork bike Fox 36 Factory Step Cast 2021

Brands: Fox
€18.00
Available colours:  20

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 38 Heritage Collection - Star Sam

Stickers compatible with Fox 38 Heritage Collection 2021 bike fork

Brands: Fox
€20.00
Available colours:  19

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Fox 38 Factory Step Cast - Star Sam

Stickers compatible with fork bike Fox 38 Factory Step Cast 2021

Brands: Fox
€21.50
Available colours:  20

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Fox DPX2 Shock Absorber Bike Sticker Year 2021 - Star Sam

Fox DPX2 2021 shock absorber bike compatible stickers

Brands: Fox
€11.50
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Monster Energy Model 4 Bike Sticker Choose Colour - Star Sam

Monster Energy mod-4 logo bike compatible stickers

Brands: Monster
€15.00
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bicicleta Horquilla Fox 34 Factory Step Cast - Star Sam

Stickers compatible with fork bike Fox 34 Factory Step Cast 2021

Brands: Fox
€18.00
Available colours:  20

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 32 Factory Step Cast - Star Sam

Stickers compatible with fork bike Fox 32 Factory Step Cast 2021

Brands: Fox
€18.00
Available colours:  20

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Horquilla Fox 36 Factory Año 2019 - Star Sam

Stickers compatible with Fox 36 Factory 2019 bike fork.

Brands: Fox
€15.00
Available colours:  18

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Rock Shox Judy Bike Sticker Choose Colour Year 2021 - Star Sam

Rock Shox Judy 2021 fork bike compatible stickers

Brands: Rock Shox
€18.00
Available colours:  21

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bicicleta Horquilla Fox 32 Heritage Collection - Star Sam

Stickers compatible with fork bike Fox 32 Heritage Collection 2021

Brands: Fox
€20.00
Available colours:  18

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Fox 38 Performance Elite - Star Sam

Stickers compatible with fork bike Fox 38 Performance Elite 2021

Brands: Fox
€20.00
Available colours:  20

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Rock Shox 35 Mod 2 Año 2021 - Star Sam

Stickers compatible with fork bike Rock Shox 35 2021

Brands: Rock Shox
€18.50
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Fox Float X2 Shock Absorber Bike Sticker Year 2018 - Star Sam

Fox Float X2 2018 shock absorber bike compatible stickers

Brands: Fox
€11.50
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bicicleta Horquilla Fox 36 Performance Elite - Star Sam

Stickers compatible with fork bike Fox 36 Performance Elite 2021

Brands: Fox
€20.00
Available colours:  17

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Pegatinas Bicicleta Horquilla Fox 40 Heritage Collection - Star Sam

Stickers compatible with fork bike Fox 40 Heritage Collection 2021

Brands: Fox
€22.50
Available colours:  18

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Rock Shox Pike Bike Sticker Choose Colour Year 2021 - Star Sam

Rock Shox Pike 2021 fork bike compatible stickers

Brands: Rock Shox
€18.00
Available colours:  21

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bicicleta Horquilla Fox 34 Heritage Collection - Star Sam

Stickers compatible with fork bike Fox 34 Heritage Collection 2021

Brands: Fox
€21.50
Available colours:  18

Modo de empleo

Clean previously the surface where the adhesive is going to be placed. Use soapy water and then glass cleaner or alcohol to remove impurities from the surface. When you separate the carrier vinyl from the base (in case you have carrier vinyl) you must do it slowly (without pulling), all the adhesive vinyl pattern must be fixed to the carrier vinyl. Place the adhesive in the desired location and apply water. Once in place, apply firm and even pressure on the adhesive from the center outwards. 

Cube MTB 29 Model 2 Bike Sticker Choose Your Colour - Star Sam

Cube MTB 29" wheel rim bike compatible stickers mod-2

Brands: Cube
€27.50
Available colours:  15

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bicicleta Horquilla Fox 34 Float Performance - Star Sam

Stickers compatible with fork bike Fox 34 Float Performance 2020

Brands: Fox
€15.00
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Rock Shox Poetry Ultimate Fork Bike Sticker 2020 - Star Sam

Rock Shox Lyrik Ultimate 2020 fork bike compatible stickers

Brands: Rock Shox
€15.00
Available colours:  19

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

DT Swiss 240 Ratchet Exp 2021 Socket Bike Sticker - Star Sam

DT Swiss 240 Ratchet Exp 2021 hub bike compatible stickers

Brands: DT Swiss
€10.00
Available colours:  20

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Bici Horquilla Fox 36 Performance Elite Año 2018 - Star Sam

Stickers compatible with Fox 36 Performance Elite 2018 bike fork.

Brands: Fox
€14.00
Available colours:  17

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Cube MTB 29 Rims Bike Sticker Choose Your Colour - Star Sam

Cube MTB 29" wheel rim bike compatible stickers

Brands: Cube
€25.00
Available colours:  15

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Fox Float DPS Shock Absorber Bike Sticker Year 2020 - Star Sam

Fox Float DPS 2020 shock absorber bike compatible stickers

Brands: Fox
€13.50
Available colours:  15

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Fox DHX2 Shock Absorber Bike Sticker Year 2021 - Star Sam

Fox DHX2 2021 shock absorber bike compatible stickers

Brands: Fox
€11.50
Available colours:  18

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

Pegatinas Para Cuadro De Bicicleta Cube 8 Logos - Star Sam

Stickers compatible with Cube 8 bike frame logos

Brands: Cube
€13.00
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Pegatinas Bicicleta Amortiguador Fox Float DPS Elite - Star Sam

Stickers compatible with Fox Float DPS Elite bike shock absorber

Brands: Fox
€13.50
Available colours:  16

Modo de empleo

Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera. 

Monster Energy Model 2 Bike Sticker Choose Colour - Star Sam

Monster Energy mod-2 logo bike compatible stickers

Brands: Monster
€15.00
Available colours:  22

How to use

Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.

test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test test

The widest catalog of bicycle stickers can be found at Star Sam. We specialize in digital printing of the highest quality, obtaining stickers for bikes resistant to sun, water or scratches. Select your brand or part of the bike that you would like to customize and choose your favorites from our infinite designs. You will want them all!