Spanish
English
Italian
Deustch
French
Polski
Portugues
Greek
- -15%
- -15%
Stickers compatible with Cannondale Scalpel-Si bike frame
€18.70
€22.00
Modo de empleo
Limpiar previamente la superficie donde se vaya a colocar el adhesivo. Utilizar agua jabonosa y posteriormente limpia cristales o alcohol hasta eliminar las impurezas de la superficie. Cuando separe el vinilo transportador de la base (en caso de que tuviera vinilo transportador) debe hacerlo despacio (sin tirones), todo el dibujo de vinilo adhesivo debe quedar fijado al vinilo transportador. Coloca el adhesivo en el lugar deseado y aplica agua. Una vez colocado, aplica presión firme y uniforme sobre el adhesivo desde el centro hacia fuera.
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
Trek Remedy 8 frame bike compatible stickers
€15.30
€18.00
How to use
Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
- -15%
Specialized mod-3 frame bike compatible stickers Size M
€11.90
€14.00
How to use
Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.
- -15%
BMC frame bike compatible stickers Die cut
€15.30
€18.00
How to use
Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.
- -15%
Manitou frame bike compatible stickers
€12.33
€14.50
How to use
Previously clean the surface where the adhesive is to be placed. Use soapy water and then glass cleaner or alcohol until the impurities on the surface are removed. When separating the carrier vinyl from the base (in case you had carrier vinyl) it should be done slowly (without pulling), all the adhesive vinyl drawing should be fixed to the carrier vinyl. Place the adhesive in the desired place and apply water. Once attached, apply firm pressure to the adhesive from the center out.
- -15%
- -15%
- -15%
- -15%
- -15%
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test
test